Wireless Tethering - The next level...

Hello!  It's been a while!  How are you?  Hope you are well...

Ok, now that the pleasantries are out of the way, I have something really exciting to show you guys.  A while back I wrote an article showing off something I was working on to help with the motion shots in my automotive photography.  Some of you may remember my 'Wireless Tethering' device.  Yes, we all know it's an oxymoron, but that's what makes this so damn cool.  Well, I've recently updated it and it's now even cooler, not to mention more practical.
Read on to find out more...
Turns out the original design, while good enough to get me out of trouble, just didn't 'feel' right.  I always felt like it was about to fall off the camera or break or something.  So it was time to re-think how it was all put together.  I ended up coming up with something that not only makes it look more professional, but hides and protects it, and makes it possible to mount on a tripod with a flash trigger in the camera's hot-shoe.
So, to skip the fussity fuss, this is what it looks like now:
 
As you can see, I have it mounted inside my MB-D10 vertical grip.  To do this I used my spare MS-D10 battery holder which holds 8xAA batteries.  I then cut off the battery mounts from one side so that I could fit the Trulink device board inside but still be able to mount 4xAA batteries, which is what is required to power the Trulink board.  I then modified the battery circuit by pulling out the top connector plate at the back of the battery holder and effectively cutting it in half.    At the same time I cut off the top contacts so that the batteries would no longer supply power to the camera and become a completely independant circuit.  I then soldered a wire to the remaining part of the back plate, ran it up the front to a switch, then soldered the last wire to the bottom contact plate to connect the positive.
Fitting in the Trulink board was probably the most tricky part.  In the end I just drilled a hole for the antenna to stick through, then I grinded down the plastic around it so that it would sit flat and straight.  I then had to use a washer as a spacer because I needed the antenna to screw in tight to hold the board in place.  After that it was just a matter of wiring up the power and modifying the USB cable to the right length.
In the end, it all sits straight and firm and fits into the MB-D10 perfectly.
If you're wondering why, while I'm ok with soldering, I didn't just solder the USB cable onto the board to remove the need for the USB-A connector, well, I tried that and it just didn't work for some reason.  Not sure why.  Possibly a grounding issue.  But this works and the USB-A connector sort of acts as extra support anyway.
So that's it.  It wasn't really a major exercise in the end and it just required a bit of fore-thought before cutting anything up.  If you do stuff up though you can get another MS-D10 on eBay for like 20 to 30 bucks (I got a spare for US$19.99).  You can also see by the photos that I drilled a hole in the wrong spot because I didn't plan it too well in the beginning.  I just plugged up with a little rubber grommit that I found laying around. Oh, as for software, I'm still using Breeze Systems, nkRemote and it's doing me quite well.  If you're after a pretty neat, simple remote camera control application for Nikon cameras, give it a try.  They have different versions for Canon as well so Canonites have a look too.  No, I'm not endorsed by them or anything.  I just think their software is cool. :)
I'll have some photos of it in action at some point.  I have an automotive shoot coming up this weekend that I am planning on using it at.  It will make it so much easier to be able to sit in the car and wirelessly stream LiveView from the camera and taking pictures.
P.S. Sorry for the uber slackness on posting!  I've been really REALLY busy!
Finally, here's a photo of it all together and on a camera.

37 Comments

c27099d562f9cb719d14ea3f3baf409c
Teon on July 25, 2017 at 12:31 pm
Nice work. A really fantastic result and very professional looking. Keen to see your next project :)
Replies:
b99206a5f8a57d2528bf3afd1015335e
jonathan on July 25, 2017 at 12:31 pm
does any body knows if the trulink are mac compatible ?????
b47bf247b28a524e1803fb1f9b9e5085
NR Admin on July 25, 2017 at 12:31 pm
Thanks for your email. I tried to contact you back, but it seems that your email is not working. Would you like to write a guest post on this topic for NikonRumors?
Replies:
dc6aee4a64995207ad3bc27dc1c174f0
Joseph Townsend on July 25, 2017 at 12:31 pm
DIY wireless tethering for Nikon D300. Can you make me one or how can i make my self one. I have been looking for a way to tether like that for years PLEASE HELP THANKS
d41d8cd98f00b204e9800998ecf8427e
[...] DIY wireless tethering for Nikon D300s was created by Jamie Carl. “As you can see, I have it mounted inside my MB-D10 vertical [...]
d41d8cd98f00b204e9800998ecf8427e
[...] http://www.jamiecarl.com.au/blog/wireless-tethering-the-next-level/ [...]
d41d8cd98f00b204e9800998ecf8427e
Wireless Tethering? | pixelcount photography on July 25, 2017 at 12:31 pm
[...] Jamie Carl’s post – http://www.jamiecarl.com.au/blog/wireless-tethering-the-next-level/ [...]
d41d8cd98f00b204e9800998ecf8427e
[...] Wireless Tethering – The next level… | Jamie Carl Photography. Share and Enjoy: [...]
a3e5d943d47fb826db08f184d5a699cd
Geoffrey on July 25, 2017 at 12:31 pm
Amazing......I love it!! Which model of trulink did you use!
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
I used the 29571 kit. Here's a link to the eBay auction where I bought it: http://cgi.ebay.com.au/TRULINK-WIRELESS-USB-DEVICE-ADAPTER-KIT-29571-/190517933671?pt=LH_DefaultDomain_0&hash=item2c5bc0f667
bb7f6d6765df10b388bff51104293c62
Ronny on July 25, 2017 at 12:31 pm
How about making one with internal antenna? or one with bluetooth?
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Dude, I'm just a photographer, not an electrical engineer! haha ;) I just used off the shelf bits and pieces to make this and wired it all together, nothing more. Maybe that's something you could take a crack at yourself? The only issue I think would be that the range of Bluetooth is only about 10ft, instead of the 30ft+ that I get from the Wireless USB.
1411bd69e32f17d4cfb17df32c5241a0
Ralph on July 25, 2017 at 12:31 pm
Nice work! Just a question, do the buttons on the grip still work?
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Yes, definitely! There's actually no modifications to the grip itself at all. It still functions 100% even with a battery in it. I actually only have one MB-D10 and I have EN-EL4a battery that lives in it constantly for my professional work so I probably wouldn't have done any of this if it meant crippling the grip.
550c2a57c7ae3bfea29755e3f7865ccb
Joas on July 25, 2017 at 12:31 pm
Jamie,
This is one of the best DIY product i've ever seen. Very clean and sophisticated. Now I am thinking if I can do this myself. You made it look so easy to do.
Well done and thank you for sharing.
joas
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
You're welcome! And yes, you should give it a shot yourself. I think you'll find that it's even easier then it looks here!
d8eb2d024ab8694efd8b48c2211078a3
SpeednutDave on July 25, 2017 at 12:31 pm
I've considered tethering, but know that I will eventually snag the tether cord on something causing a laptop to fall...
Your solution is quite interesting, I'll have to give it a crack someday. I may try a low cost option instead (D300s is my backup camera, do not have vertical grip) with a simple project box, 0.5m USB cable, a LiPo pack, and ball bungeed to a tripod leg. Mentally wondering if an Altoids tin could hold it all, plus the voltage regulator bits. This way it would work on my D3 too. I'd loose your clean integrated design though... Hmmm... :-)
May I suggest you plug the extra hole with an LED to indicate "power on". Might be a handy reminder that you forgot to power the unit off at the end of a shoot or that it got switched on accidently.
Thanks!
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
I did think of putting in an LED to indicate power as it is slightly annoying trying to remember which way the switch is for on. Unfortunately I just haven't gotten around to it. :)
9e710418599420c8f3f4723468cb3669
Tony Fleming on July 25, 2017 at 12:31 pm
GREAT JOB JAMIE!
It would be nice to have a nice detail schematics and what all you had to do, with pictures.... - I know, it is lot of work, but some people would not attempt to do it without that.
I work with electronics and cameras/computers/Arduino ... so I can make it myself. But I am thinking about people who need lot more info. I AM VERY HAPPY that people like you are doing these projects at home - NIKON, how about that? Why not to make NIKON an a OPEN OS so people can make many other additions or customize the camera like JAMIE!
Thanks JAMIE!!!!
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Yeah, unfortunately I don't really have the time to knock up something like that. I was kinda hoping that the photos I provided would be enough as it's not difficult at all. The thing is, I don't work with electronics and only really have a basic understanding of these things, yet a gumby like me can still put something like this together. I think that if anyone is willing to give it a shot, just knowing that it's possible is enough.
4ace2931fab24777bb342319c01719ef
gb007bond on July 25, 2017 at 12:31 pm
Hello,
Saw this via the NR forum its great to see a someone from downunder the skills that we have.
03e93f5ab28c014122575f5ec2a35e3b
brett maxwell on July 25, 2017 at 12:31 pm
Wow, I love the ingenuity!
I'm quite happy using an Eye-fi card, especially with tethering to an iPad, but I guess with this setup you get some cool additional features like live view and camera controls.
Replies:
f912a6b2514a2b8e0ce6ab4338c3cb9b
Daf on July 25, 2017 at 12:31 pm
Unfortunately EyeFi don't make Compact Flash cards (I have asked why not several times but just got a curt response), and say they won't work in converters :(
Plus the metal body of pro cameras may block such internal transmitters.
a581c899294a6fec56313df2640e196d
Donz on July 25, 2017 at 12:31 pm
Nice work Jamie :)
0a211a3e28f6d50d209c47bc094623ed
zip johnson on July 25, 2017 at 12:31 pm
I'd like to have this wireless for my canon 30D and nikon D300s.
how much would you charge me to put one or two together?
thanks
Zip
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
I would charge you more than what Nikon or Canon would charge. ;) The whole point of this article is to let people know that making this for yourself is not difficult. Give it a go! You will have that extra bit of self-fulfillment because you built it yourself!
7c5d211a8ad4d877eab0b77a42e7d138
Von Wong on July 25, 2017 at 12:31 pm
Hey man, looks amazing... .any chance you'd be willing to make/sell finished MB-D10 grips like that? I'd be interested in buying!
Thanks
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Sorry, but unfortunately no. Considering the cost of parts and then my time on top of that, I would probably have to charge twice what Nikon charge for a Wt-4 to make it worthwhile, so not really worth it. The whole point of articles like this is to get the information out there so that people at least know that it's possible to do stuff like this themselves.
344eab8b0b9e931b76c35a07afcd53ec
Remo on July 25, 2017 at 12:31 pm
I would love to know if you would sale this kit let me know thanks
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Sorry, but no. Considering the cost of parts and then my time on top of that, I would probably have to charge twice what Nikon charge for a Wt-4 to make it worthwhile, so not really worth it. The whole point of articles like this is to get the information out there so that people at least know that it's possible to do stuff like this themselves.
db33dbb5248899f5faa87a2eb9acbc09
JohnCar5 on July 25, 2017 at 12:31 pm
Jamie's approach is indeed great, although an internal antenna would make much more sense, but as he explained it is quite difficult. Here is what I have done, using the same dongles, but mounted on the hotshoe.
http://forum.m1911.org/showthread.php?t=86940
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Nice work. Looks almost exactly like my original version. ;)
82b4d251f90281b45f78c6b8cc4a512a
Hal NL on July 25, 2017 at 12:31 pm
Hello Jamie,
Your article is very inspiring! I'm shooting shooting my D700 tethered in my studio from time to time, yet not as often as I would like, as the usb wires are a bit of a bother when it comes to mobility. I've been thinking about a wireless solution, but like many find the Nikon WT-4A not an option. Too expensive, too bulky. When I saw your elegant solution I fell in love! I managed to find a trulink 29571 which should get delivered at the end of this week/beginning of next, so I'll try my own swing at building one.
I was wondering, looking back at this project, have you found anything that you'd do differently if you had the chance to do it all over again? Your instructions are pretty clear to understand, I'm confident I'll get it to work! :-)
Thanks again for taking the time to write this down, it's truely inspiring!
Greetings from Holland!
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Hi Hal! It's humbling to learn that people in Holland are reading this, so thanks for commenting. To answer your question, this is actually the second time I've built this, so I've already had a chance to do things differently. The first version was mounted on the hot-shoe and while it was still better than a WT-4, it was bulky and clumsy. Here's the old blog post on it. I'm quite happy with where it's at right now so I don't think I'll be doing any more revisions. If I do revise it though, I will of course be posting it up here!
Good luck with your build!
4fe350bd9dbc6284ab0fe5b5d6338768
Raj on July 25, 2017 at 12:31 pm
Hey Jamie,
Awesome DIY mod!!! I have the right accessories to get it done.. Just have to get the trulink usb adapter kit. Is it necessary to buy trulink itself??? If buying any other brand, what should be kept in mind, as in any technical specifications that need to be checked before choosing the usb kit???
Lastly, do u use it only for tethering, as in shooting from your PC Or does the wireless setup also allow u for FAST transfer of files?? If you do use it for transfer of files, then how fast is it approx??
TO be more specific, how satisfied are you at the transfer rates of this wireless setup?? If you could let know of approx time to transfer a SPECIFIC MB of file, it would be really helpful. Thanks in advance and keep up the gr8 work mate!
Regards
Raj
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Hey mate. Any wireless USB kit should do the job. The reason I went for the Trulink was because it was one of the smallest I could find and it fits perfectly inside the MB-D10. The only technical spec to keep in mind is if it supports video streaming. Most should though.
As for fast transfer, it's fast enough. If I want it really fast I just turn the quality down on the camera to make the files smaller and it takes about 1 second. At full resolution though it takes about 5-6 seconds to transfer a photo, which is only slightly slower than with the cable attached.
2d3547522feea694395cbde63a6c2d2f
Bruno Pires on July 25, 2017 at 12:31 pm
Is this dongle still Windows only?
Nice work! :)
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Not sure. The website for the trulink adapters is www.cablestogo.com
4aafd3a6785216feced2737c2ac28848
Luis Santos on July 25, 2017 at 12:31 pm
that´s pretty cool, great job, I am thinking of doing it myself, will let you know after :) have a great week!
4fe350bd9dbc6284ab0fe5b5d6338768
Raj on July 25, 2017 at 12:31 pm
Jamie,
Thanks mate for the quick and detailed reply. Yes, I am planning to get one for myself. Actually 5-6 seconds is not bad for a FULL RES file. Wonder how long it takes for trnasfering RAW file???... :D.. Would help if u could let me know of that. But seriously, hats off for sharing this... perfect design for people who use Battery grips!!.. Thanks once again. Looking forward to your reply.
Regards
Raj
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Actually, that 5-6 seconds I quoted IS for the RAW files. ;)
f912a6b2514a2b8e0ce6ab4338c3cb9b
Daf on July 25, 2017 at 12:31 pm
Top stuff!
Thanks for sharing
(Also found via Nikon Rumours)
It's just a shame that this won't work on my D200 (grip is different - you have to take the camera battery out). Maybe when I get a 700s/800/400 ...... (but that's another story ;)
It's shocking that Nikon sell their Wireless solution (Nikon WT-4b ) for about £550 here in the UK!
Unfortunately that USB adapter kit seems hard to get hold of in the UK too.
9c0989e4e5f3763bcb56d37401346a6b
P.J. on July 25, 2017 at 12:31 pm
Hello Jamie,
This a great idea and could know as i have been walking around with it a very long time now :)
My problem is that in the Netherlands (where i am from) it is impossible to get any wireless usb devices (seems to use an illegal frequency).
Orderinbg from the USA is an opotion but eveywhere i look the shipping costs are outragouse compared to the selling price of a wireless usb kit.
So...i keep hoping that someday i can do this modification on a Canon grip.
d41d8cd98f00b204e9800998ecf8427e
DIY wireless tethering for Nikon D300s on July 25, 2017 at 12:31 pm
[...] DIY wireless tethering for Nikon D300s was created by Jamie Carl. “As you can see, I have it mounted inside my MB-D10 vertical [...]
51a747d2e06c657a457bbdbb4bfd9a18
Fabrice on July 25, 2017 at 12:31 pm
Hi Jamie,
If I understand it's USB 1.0 ? Isn't it possible to do this with USB2 ?
d41d8cd98f00b204e9800998ecf8427e
[...] Jamie’s Wireless Tethering (The Next Level): http://www.jamiecarl.com.au/blog/wireless-tethering-the-next-level/ [...]
c8e4ecdb6d99796763c7e264d17b4bd3
Michel Merx on July 25, 2017 at 12:31 pm
Can it send pictures directly to a tablet?
(I thought it needed ADHOC ? )
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
That's not what this is designed for. I think you'll find that this solution will never work with a tablet. If you just want to automatically send photos to your tablet you'd be better off with an Eye-Fi card.
a9d87bd9a120cbcae646b2e2b38be70f
Anton Edvard Kristensen on July 25, 2017 at 12:31 pm
Hi Jamie, what a fantastic product i may say, but i have to ask, have you tried this on a Canon camera? i know that on the Nikon camera's you can set a setting that tells the camera to shoot out the usb port or into the card, but on Canon there isnt a such a setting, its just automatic when you plug in the usb cable and its connected to the computer, how does the camera read the usb dongle ? and do you need 4xaa batterys to run the dongle, can you use like 2xaa or 6xaaa or something ? thanks for sharing this :) i have been looking for a cheaper wireless tethering option for such a long time !
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
These are just wireless USB extenders and technically have nothing to do with 'WiFi'. That is the difference. Basically, these are exactly the same as using a USB cable to connect your camera to a computer except that, you know, there's no cable bit in the middle. Also, there's no setting on the Nikons to say "shoot out the USB port". It rightly assumes that if you have a USB cable plugged in then that is what you want to do so it just does it. Lastly, the reason I used 4xAA batteries is for the voltage. The USB extenders need 5volts which is pretty much what 4 AA batteries will give you. You can run with 2 if you want, but then you need a voltage regulator circuit to up the voltage to 5 volts and keep it stable, which is more work. I should probably be using one in this, but really couldn't be bothered. :)
a9d87bd9a120cbcae646b2e2b38be70f
Anton Edvard Kristensen on July 25, 2017 at 12:31 pm
and is it hard to get those wireless dongles, what is different from these dongles than any other that are wireless usb dongles and can connect to a wifi network ?
Replies:
5e0191898d1e5fffa48dff96d9e915e5
Jamie Carl on July 25, 2017 at 12:31 pm
Probably nothing. I used them because they were the smallest I could find and I wanted them to fit in the MB-D10 grip.
e5076fd9a067097a2bd187fde97ae748
Seb F. on July 25, 2017 at 12:31 pm
Hi Jamie & thanks a lot for sharing this (& the previous version also !)
I am trying to buy a WUSB kit, but it seems that the one you presented is not sold anymore.
Do you have a clue on a possible replacement ?
(the cables unlimited's set is also unavailable, except for 1 refubirshed on Amazon, that I cannot buy because I live in Europe :-( )
Any help appreciated ;-)
Replies:
5e0191898d1e5fffa48dff96d9e915e5
jamie on July 25, 2017 at 12:31 pm
Sorry bud. I haven't done any research on what's available for a while now since mine just works. But really, you could use any wireless USB kit as long as it supports the full USB 2.0 spec.
0231fb84fed1a7181106e615421bf11d
Pepa Hajek on July 25, 2017 at 12:31 pm
This another projetc uses a MK802 mini PC and can be controlled even through WEB interface http://www.photocamcon.com/index.php?entry=CamCon-MK802-wireless-photography MK802 is quite cheap but it is still in development phase
d437a6411707e53f44abab2920b93581
Pete on July 25, 2017 at 12:31 pm
Hi jamie.
Brilliant - this is exactly what im looking for - why not put it into manufacture - you have clearly found a market.
failing that - i dont suppose you did a walk through or video of how you did this?
one thing i dont understand is - what do you use to show the shots on the laptop?
Replies:
5e0191898d1e5fffa48dff96d9e915e5
jamie on July 25, 2017 at 12:31 pm
Pete. The software is the same as from the previous article. NKRemote from Breeze Systems. http://breezesys.com/NKRemote/
d41d8cd98f00b204e9800998ecf8427e
[...] auf die Suche begeben. Es gibt viele DIY-Lösungen. Die beste die ich gefunden habe, ist wohl diese. Da diese DIYs auch nicht immer wirklich billig sind und ich dann doch ein wenig ängstlich bin, [...]
c433767a383cf0ac5a1811541d15c543
kostas on July 25, 2017 at 12:31 pm
great work !!!i'm trying to find this adapters but i can't!did you know another model that works?

Leave a reply

Commenting as